Introduction

Wall rug is a new trend in interior design that you can utilize it in almost any space that you want. Hanging a rug on your wall can be a stylish way to add texture, color, and interest to any room. Whether you have an antique rug, a modern tapestry, or a woven textile, properly displaying it can elevate your decor. In this guide, we’ll answer ‘how to hang a rug wall’ in a comprehensive guide.

In this guide, we’ll walk you through the step-by-step process of choosing the right rug, preparing the wall, selecting the appropriate mounting hardware, marking the wall, installing the hardware, hanging the rug, securing it in place, and adding the finishing touches to perfect the display.

Choosing Your Rug

When selecting a rug to hang on your wall, there are a few key factors to consider:

• Size: Measure the wall space and choose a rug that fits the area appropriately, accounting for mounting hardware. Oversized rugs can overwhelm a wall while undersized rugs may look out of place.
• Weight: Select a relatively lightweight rug to ensure it can be safely mounted.
• Material: Opt for natural fiber or synthetic rugs that are not too heavy or thick. Avoid very thick or heavy materials like leather or fur.
• Design: Choose a rug with a design, color or pattern that will stand out and look appealing when hung vertically on a wall.

Busy patterns and vivid colors tend to show best.

Take measurements, evaluate the wall location, and choose a rug that’s sized appropriately, relatively lightweight, made of suitable materials, and has a visually striking design. This will help ensure you have a rug that can be safely and decoratively displayed on your wall.

Preparing the Wall

Properly preparing the wall is essential to ensure the rug lays flat and to prevent any damage. This involves filling holes, sanding the wall, cleaning the surface, and potentially applying a fresh coat of paint.

Wall-mounted rugs should be relatively lightweight.

Mounting Hardware

The right mounting hardware is crucial for properly hanging a rug on the wall. The main options are:

Rug Hangers

Rug hangers are two-pronged hooks specifically designed for hanging rugs. They come in various sizes to accommodate different rug weights. Rug hangers allow the rug to hang flat against the wall and are easy to install. Make sure to get rug hangers rated for the weight of your rug.

Cleats

Cleats are L-shaped hardware pieces that screw into the wall. The bottom of the rug slides over the protruding ledge. Cleats provide a very secure hold. However, they don’t allow the rug to lie completely flat against the wall. Look for cleats made of durable metal.

Adhesive Hooks

Adhesive hooks stick directly to the wall without screws. They can easily support lightweight rugs. Ensure the adhesive is formulated for the wall material. Adhesive hooks often leave residue behind when removing.

Screw Hooks

Basic screw-in hooks work for smaller, lightweight rugs. Use hooks specifically made for hanging objects. Make sure the hooks are long enough to accommodate the rug’s thickness when doubled over.

Consider both the size and weight of your rug when selecting mounting hardware. Heavier rugs require more substantial hardware anchored firmly into studs or drywall anchors. Improper hardware can lead to the rug falling and causing damage or injury.

Marking the Wall

Mark the ideal height for the rug on the wall, as well as the exact spots for each piece of mounting hardware. It’s important to locate and mark the wall studs within the designated spots for hardware placement.

First, determine the ideal height for the rug. Generally, rugs should be hung so the bottom edge is about 6-12 inches above the floor. Hold your rug up to the wall to find the right height.

Second, once you’ve decided on the height, measure and mark where the mounting hardware will go using painter’s tape or pencil. Mark the exact spots for each hardware piece based on the size of your rug and hardware recommendations.

Installing Hardware

Key steps for installing the hardware include pre-drilling holes if needed, following the specific instructions for the type of hardware used, and ensuring the hardware is securely mounted.

The material of your wall-hung rug matters too. Natural fiber rugs like wool, cotton, jute, or silk tend to be lightweight and suitable for hanging.

Ensure securely mounted. After installing the hardware, test it by gently pulling on it before hanging your rug. Verify it is mounted flush and securely enough to hold the rug’s weight. Tug the hardware in different directions to confirm it won’t loosen or pull out.

Hanging the Rug

Carefully lift and position the rug on the hardware. For cleats, place the rug holes over the hooks. Line them up evenly. For adhesive strips, press the rug firmly onto the wall to adhere it. Apply even pressure across the entire surface.

Slowly release the rug, keeping your hands underneath it to support the weight. Make sure the cleats or adhesive hold before letting go. The bottom of the rug should sit flat against the wall without sagging or pulling.

If needed, lift the rug and reposition until it hangs cleanly and evenly on the wall hardware. Take care not to bend or twist the rug during this process.

Securing the Rug

After hanging the rug, firmly secure it using the chosen hanging method, whether that involves screws, adhesive, or cords. About cleats, make sure to firmly screw the closed ends over the rug’s hanging loops or tabs.

For adhesive, carefully apply even pressure across the entire back of the rug, smoothing out any air bubbles or gaps. Regarding hooks, carefully attach the chains, cords, or other hanging hardware to the hooks along the top edge of the rug.

Take your time with this step and double-check your work. Properly securing the rug will prevent it from falling off the wall, avoiding damage or injury.

Finishing Touches

Conceal any visible hardware, ensure the rug lies flat against the wall with no buckling, and consider adding furniture and decorative accessories to complete the look.

Use these finishing touches to complete the look:

• Conceal any visible hardware with coordinating paint or putty if desired. This gives a more seamless appearance.
• Gently push on the edges of the rug to ensure it lies flat against the wall with no buckling or warping. Smooth out any wrinkles.
• Use a soft brush attachment to vacuum the rug, removing any dust or debris that accumulated during hanging. Vacuuming brings out the color and texture.
• Consider placing furniture like a console table or bench below the rug. This anchors it and completes the styling.
• Add coordinated decorative accessories on the furniture, such as vases, candles, baskets etc. This enhances the rug’s appearance.
• Step back again when finished and admire how the rug transforms the space! Enjoy its beauty.

By following these steps, you can successfully hang a rug on your wall and elevate the visual appeal of your space. Whether it’s a statement piece, a traditional textile, or a modern tapestry, a wall-mounted rug can bring a unique and eye-catching element to your decor. Happy decoring!